Afatech Af9015 Drivers For Mac
After i install Blach hole 144 my usb tuner is not working - could not find any channel Previous version vas Blach hole 137 and usb tuner works dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state. Dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick) af9013: firmware version:5.1.0 DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T). NXP TDA18218(LD) successfully identified. Dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected.
Usbcore: registered new driver dvbusbaf9015 DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T). After i install Blach hole 144 my usb tuner is not working - could not find any channel Previous version vas Blach hole 137 and usb tuner works dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state. Dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick) af9013: firmware version:5.1.0 DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T). NXP TDA18218(LD) successfully identified. Dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected. Usbcore: registered new driver dvbusbaf9015 DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T).
First of all I have flashed receiver with new BlackHole V1.5 I have a OEM sinovideo SV-3420B USB DVB-T tuner and tried to installed today. This device was purchased from ebay lately. Looks like this. Same as most OEM sinovideo USB DVB-T tuners. The manufacturers Specifications With E3C EC168 chipset. With Maxliner 5003s silicone tuner.
I have been using it on my computer for 1-2 weeks. Installed driver on computer is AF9015 USB DVB-T tuner. Channel scan works fine and everything is ok. Today after reading the news about new BH 1.5 image native support for USB DVB-T tuners (Single/Dual/etc.) and already supports devices with AF9015 I thought to gived a try.
The driver i have installed at VU+ Solo is AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+) The DVB-T tuner is recognized and activated as AF9015. I have set it up as European DVB-T tuner. I have removed the RF cable from TV and connected it to USB DVB-T tuner but neither Auto-scan or manual-scan find any services. Am I missing something? Please Advise me.
First of all I have flashed receiver with new BlackHole V1.5 I have a OEM sinovideo SV-3420B USB DVB-T tuner and tried to installed today. This device was purchased from ebay lately. Looks like this.
Same as most OEM sinovideo USB DVB-T tuners. The manufacturers Specifications With E3C EC168 chipset. With Maxliner 5003s silicone tuner. I have been using it on my computer for 1-2 weeks. Installed driver on computer is AF9015 USB DVB-T tuner.
Channel scan works fine and everything is ok. Today after reading the news about new BH 1.5 image native support for USB DVB-T tuners (Single/Dual/etc.) and already supports devices with AF9015 I thought to gived a try. The driver i have installed at VU+ Solo is AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+) The DVB-T tuner is recognized and activated as AF9015. I have set it up as European DVB-T tuner.
I have removed the RF cable from TV and connected it to USB DVB-T tuner but neither Auto-scan or manual-scan find any services. Am I missing something?
Please Advise me. I still have a problem with DVB-T USB AF9015. The channels of the receiver can watch freely, but as I begin to switch to other channels after a while I have a black screen, and helps only a full restart tuner VU + DUO - angelofsky1980 wrote yesterday I bought a USB hub. Today I bought this USB hub and still have the problem that when switching from the tuner DVB-T USB AF9015 after a while I have a black screen and helps only a full restart tuner VU + DUO - USB hub that I bought today is of course an external power supply.
Do not know if it's not the fault of drivers for the AF9015. I have a problem also.
Afatech Af9015 Drivers For Mac Free
I have a AVerTV Volar Black HD and a Sinovideo Usb the Volar works fine alone. I tried to install in the 1.5 BH version both but i cannot make them work.
I think that both use the same driver and i choosed in the install that both stick use the same driver Volar Black HD but none works. When i choose 2 usb tuners with different driver and i choose both times the same Volar Black HD drivers then the volar works but the sinovideo dont. What i must choose as matter the USB Panel to make them both work? Thx in advance.
I have a problem also. I have a AVerTV Volar Black HD and a Sinovideo Usb the Volar works fine alone. I tried to install in the 1.5 BH version both but i cannot make them work. I think that both use the same driver and i choosed in the install that both stick use the same driver Volar Black HD but none works.
When i choose 2 usb tuners with different driver and i choose both times the same Volar Black HD drivers then the volar works but the sinovideo dont. What i must choose as matter the USB Panel to make them both work? Thx in advance. I did a dmesg and i get this as matter the usb sticks dvb-usb: found a 'AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+)' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' dvb-usb: found a 'AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+)' in warm state. Dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+)) af9013: firmware version:5.1.0 DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T).
MXL5005S: Attached at address 0xc6 dvb-usb: AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+) successfully initialized and connected. Dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state. Dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick) af9013: firmware version:5.1.0 DVB: registering adapter 2 frontend 0 (Afatech AF9013 DVB-T). NXP TDA18218HN successfully identified. Dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected.
Usbcore: registered new driver dvbusbaf9015 DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T). Af9015: too much data; cmd:41 len:59 I2C write failed ret:-22 reg:00 len:59 DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T). I did a dmesg and i get this as matter the usb sticks dvb-usb: found a 'AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+)' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' dvb-usb: found a 'AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+)' in warm state. Dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+)) af9013: firmware version:5.1.0 DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T).
MXL5005S: Attached at address 0xc6 dvb-usb: AverMedia AVerTV Volar Black HD/HD+ (A850)/(A850+) successfully initialized and connected. Dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state. Dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick) af9013: firmware version:5.1.0 DVB: registering adapter 2 frontend 0 (Afatech AF9013 DVB-T). NXP TDA18218HN successfully identified.
Dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected. Usbcore: registered new driver dvbusbaf9015 DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T).
Hp Printer Drivers For Mac
Af9015: too much data; cmd:41 len:59 I2C write failed ret:-22 reg:00 len:59 DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T).
Brother Printer Drivers For Mac
Af9015(4) - webcamd driver for Afatech 9015 DVB-T receiver Quick Navigator Search Site Unix VPS. Support FAQ Network Miscellaneous Manual Reference Pages - AF9015 (4) af9015 - webcamd driver for Afatech 9015 DVB-T receiver CONTENTS af9015 The af9015 driver supports the Afatech AF9015 DVB-T USB 2.0 receiver. Devices using the af9015 driver become available to other applications once (8) is loaded. The af9015 driver should work with the following USB devices. The (8) command can be used to determine the VendorID:ProductID of a plugged in USB device.